Adewumi, B.A’s Publications

A. Books/ Chapters in Books/ Contributions in Books/ Monographs:

1. Adewumi, B. A. 2008. Fruit production and processing: Option for rural industrialization and poverty alleviation in Nigeria. In: Food, Health and Environmental Issues in Developing Countries: The Nigerian Situation, Adebooye, C. A., Taiwo, K. A. and Fatufe, A. A (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. Pg 43 – 53. 

2. Adewumi B. A 2009. Important engineering issues in the post harvest technology and quality assurance for fruits and vegetables in Africa. Adebooye, C. A., Taiwo, K. A. and Fatufe, A. A (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. In Press.

3. Adewumi B.A, K. P. Adejuwon, H. N. Ayo-Omogie, A. Jeff-Agboola, T. A Opeyemi, R. O Osaade and B. O. Akomolafe. 2009. Microbial study on the concentrates produced from tropical fruits using dry freezing and rotary evaporation. Adebooye, C. A., Taiwo, K. A. and Fatufe, A. A (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. In Press. 

4. Adewumi, B. A. 2010. Agricultural mechanization input for sustainable raw material sourcing in Nigeria. Chapter 8. In: Nagerian agro raw material development, Vol. 1: Some industrial crops and salient issues. P. O. Onwualu, S. C Obasi and , U. O. Ukpasi (Eds.). Book publication by Raw Material Research and Development Council of Nigeria. Pp 126 – 141.

5. Adewumi B.A, 2010. Agro-based alternatives to petroleum economy. Jekayinfa (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. In Press.

B. Papers already Published in Journals or in Press:

6. Adewumi, B. A. and J.C. Igbeka. 1993. The effect of steaming on the physical and dehulling characteristics of locust bean (parkia biglobosa). Tropical Agriculture 70(3): 380-382, Trinidad.

7. Adewumi, B. A. and O.S.V. Oduwole. 1995. Problems affecting the utilization of silo storage in Nigeria. NSE Trans. 30(2): 27-32. Nigeria.

8. Adewumi, B. A. 1996. Physical and mechanical properties of rice varieties in Ondo- State. Applied Tropical Agriculture 1(1): 24-28. Nigeria.

9. Adewumi, B. A. and J. C. Igbeka. 1996. Performance evaluation of a locust bean burr- type dehuller. Research &Technical Journal 5(1): 1-8. Nigeria.

10.  Adewumi, B. A. 1997a. Development in the technology of locust bean processing. Journal of Techno science 1(1): 9-14. Nigeria.

11.  Adewumi, B. A. and O.R. Ayodele. 1997. Design and construction of a device for the determination of static and dynamic angle of repose of granular agricultural materials. Nigerian Journal of Tech. Education 24(1): 101- 106. Nigeria.

12. Adewumi, B. A. 1997b. Relationship between the angle of repose and related parameters for granulated agriculture materials. Applied Tropical Agriculture 2 (2): 114 – 119. Nigeria.

13. Adewumi, B. A. 1998a. Development of a kerosene fueled free convection egg incubator. NSE Transactions 33(2): 30-40. Nigeria.

14. Adewumi, B. A. and A. P. Olalusi 1998. Performance of a concave type manually operated locust bean dehuller. Journal of Agricultural Technology 6(2):23-30. Nigeria.

15. Adewumi, B. A., T. Adegbulugbe and T. Audu. 1999. Design of a disc-type melon sheller. Journal of Science, Engineering and Technology. 6(1): 1492-1501. Nigeria.

16. Adewumi, B. A. and Oduniyi, A.I. 1999. Design, fabrication and testing of a charcoal fueled table incubator. Journal of Applied Sciences. 2(1): 159-175. Nigeria.

17. Adewumi, B. A. and F. R. Falayi.1999. Performance evaluation and modification of a portable kerosene fueled incubator. Nigerian Journal of Animal Production 26(1): 111-114. 

18. Adewumi, B. A. 1999. Design and preliminary testing of a citrus juice extractor. Nigerian Journal of Tree Crop Research 3(2): 9-18. Nigeria.

19. Adewumi, B.A. 2000a. Non destructive methods of determining egg fertility. Journal of Science, Engineering and Technology 7(2):2423-2430. Nigeria.

20. Adewumi, B. A. 2000b. Generation, disposal and management of agricultural waste in Ondo and Ekiti States. Journal of Urban and Environmental Research 2(1):1-8. Nigeria.

21. Adewumi, B. A., A.I .Adedokun and E. O. Adeola. 2000. Characterization of a hydro cyclone for cowpea hull separation. Journal of Applied Sciences 3(3):1310- 1326. Nigeria.

22. Adewumi, B. A. 2000c. Design and testing of a manually operated cashew decorticator. Nigerian Journal of Tree Crop Research 4(2): 10-17. Nigeria.

23. Adewumi, B. A. Fuwape, I. A and Arogunjo A. M. 2001. Design, fabrication and testing of an optical device for the determination of egg fertility. Global Journal of Pure and Applied Sciences 7(1): 177-180. Nigeria.

24. Adewumi, B. A., Arogunjo A.M. and I.A. Fuwape. 2001. Determination of egg fertility using the photometry property of poultry egg. Journal of Applied Sciences 4(2):1760-1765. Nigeria.

25. Adewumi, B. A. and J. Funmiluyi. 2001. Development of a compressive strength tester for agricultural crops. Ife Journal of Technology 10 (1): 63-66. Nigeria.

26. Ademosun, O. C., Adewumi, B. A., Olukunle, O. J., and Adesina, A. A. 2003. Development of indigenous machines for weeding and grain harvesting: FUTA Experience. Journal of Engineering and Engineering Technology 3(2): 77 – 84. Nigeria.

27. Adewumi, B. A. 2004a. Preliminary studies on an AC/DC heat source cum kerosene lantern for egg incubation. Nigerian Journal of Animal Production 31(1): 32-39. Nigeria.

28. Ogunlowo, A S., Agbetoye L. A. S., Adewumi. B. A. and Adesina. A. A. 2005. The contributions of the Universities of Technology to the technology of food storage and processing in Nigeria FUTAJEET 4(1): 77-85.

29. Adewumi, B. A. and Osadahun, E. O. 2005. Design, fabrication and testing of a pedal operated beak trimming machine. Journal of Engineering in Agriculture and Environment 1: 4-9, Nigeria. 

30. Adewumi, B. A., Adegbulugbe, T., and Balogun, A. A. 2005. Performance evaluation of a modified cassava chipping machine. Journal of Raw Material Research 2(2): 103 – 117. Nigeria.

31. Adewumi, B. A., Ogunlowo, A. S. and Ademosun, O. C. 2006. Investigating particle trajectory as a parameter for selecting the dimensions of cross flow classifier. CIGR Ejournal, VIII: 1-19, July, 2006. USA.

32. Adewumi, B. A., Odunmbaku, A. A. A. and Bayode, K. 2006. Design and construction of solar incubator. Journal of Food Science and Technology, 2: 105-109. Nepal.

33. Adewumi, B. A., Ademosun, O. C and Ogunlowo, A. S. 2006. Preliminary investigation on the distribution and spread pattern of cowpea in cross flow grain separator. CIGR Ejournal, VIII: 1-12, Oct., 2006. USA.

34. Adewumi B. A,, Okunola, A. A., Adewumi, O. O., Ajayi, B. O. and Owoeye, O. O.2006. Development and testing of a hand operated milking machine for small ruminants. Journal of Rural Technology 3 (1): 241 – 246.

35. Adewumi B. A and Fatusin, A. B. 2006. Design and evaluation of an impact-type hand operated cocoa pod breaker. CIGR-Ejournal VIII: 1-12, Nov., 2006. USA.

36. Adewumi B. A .2007a. Effect of fruit size and shaft speed on the juice extraction efficiency and capacity of a screw type juice extractor. Journal of Food Science and Technology, 44(1) 44-48. India.

37. Adewumi, B. A., O. C. Ademosun and A. S. Ogunlowo. 2007. Design, fabrication and preliminary testing of a thresher-cleaner for legume. Journal of Food Science and Technology, 44(3): 276-280. India.

38. Adewumi, B. A. 2007b. Modeling the performance of a manually operated legume dehuller using dimensional analysis technique. Botswana Journal of Engineering. 16 (2): 29 – 35. Botswana.

39. Adewumi, B. A. 2007c. Effect of some crop parameters on the performance characteristics of a manually operated plantain chipping machine. Botswana Journal of Engineering 16 (2): 23 – 28. Botswana.

40. Okunola, A. A., Adewumi, B. A. and Faseyi O. W. 2007. Large scale grain structures and their management in the humid part of Nigeria. . Transactions of the Nigerian Society of Engineers 42: (2): 31 – 40. Nigeria.

40. B.A. Adewumi, B. V. Sathyendra Rao, N.L. Kiran Kumar, V.M. Pratape and Srinivas. 2007: Grain Classification Using Aerodynamic Principles. African Crop Science Conference Proceedings, Vol. 8. Pp 1799-1801

41. Adewumi, B. A. 2008. Engineering education for agricultural and rural development in Africa. European Journal of Engineering Education 33(3): 321-330. Uk.

42. Mangaraj, S., Singh, R and Adewumi, B. A. (2008). Impact of milling techniques on the particle size distribution of turmeric powder. Journal of Food Science and Technology, 45 (5): 416–419. India.

43. Adewumi, B. A. 2009. Agricultural and food process engineering in Nigeria: Trends, challenges and prospects. Journal of Science, Food and Hospitality. 1 (1): 6-12. Nigeria.

44. Mangaraj, S., Singh, R and Adewumi, B. A. 2009. Wild caster (Jatropha curcas, L): A viable raw material for bio- diesel production in developing nations. Raw Material Update. 2(2): 32-34. Nigeria

C. Paper already Published in Conference Proceeding:

45. Adewumi, B. A. 1997c Design, fabrication and testing of an hydro cyclone for legume hull separation. Proceeding of the 19th Annual Conference of the Nigerian Society of Agricultural Engineers, Minna, Nigeria. 19:306-31.

46. Adewumi, B. A. 1998b Developing indigenous machinery base for crop and food processing industry in Nigeria. Proceeding of the International Engineering Conference and Annual General Meeting of the Nigerian Society of Engineers, Maiduguri, Nigeria. Pg 43-49. 

47. Adewumi, B. A. 1998c Status of cocoa processing industry in Nigeria. Proceeding of the 20th Annual Conference and General Meeting of the Nigerian Society of Agricultural Engineer, Lagos, Nigeria. 20:175-187.     

48. Adewumi, B. A. 2000d. Appropriate technology for small scale production of Cashew Nut Shell Liquid (CNSL) for poverty alleviation. Proceeding of Millennium Engineering Conference & Annual General Meeting of the Nigerian Society of Engineers, Abuja, Nigeria. Pg. 236-241. 

49. Adewumi, B. A and Akerele, F. O. 2003. Evaluation of the storage qualities of onions in domestic environments. Proceedings of the Biotechnology Society of Nigeria held at the Federal Univ. of Tech., Akure, Nigeria on 8th – 11th Sept., 2003. 

50. Adewumi, B. A. and Adewumi, O. O. 2004. Reviving the dairy industry: The challenges for the Nigerian Engineers. Proceeding of the 2nd International Conference of the West African Society of Agricultural Engineers, Ghana. Pg 505- 509. 

51. Adewumi, B. A. and Amusa, B. A. 2004. Status and prospect of the emerging fruit processing industry in Nigeria. Proceeding of the 2nd International Conference of the West African Society of Agricultural Engineers, Ghana. Pg 145 -154. 

52. Adewumi, B. A. 2004b. Appropriate and indigenous technologies for small and medium scale agro allied industries in Nigeria. Proceeding of the International Conference of the Nigerian Society of Engineers, Warri, Nigeria. Pg 124-131. 

53. Adewumi, B. A. 2005a. Research break through in egg candling technology. Proceeding of the 10th Annual Conference of the Animal Science Association of Nigeria, Ado Ekiti, Nigeria. Pg 173-176. 

54. Adewumi, B. A. 2005b. Low cost, simple incubators for rural farmers. Proceeding of the 10th Annual Conference of the Animal Science Association of Nigeria, Ado Ekiti, Nigeria. Pg 177-179. 

55. Adewumi, B. A. 2005c. Providing livelihood for rural dwellers through efficient, simple technology, low cost mechanical systems. Proceedings of the III World Congress on Conservation Agriculture, organized by the African Network on Conservation Agriculture Nairobi, Kenya, 4pp.  

56. Ageh, A. J., Adewumi, B. A and Atanda, E. O. 2005. The role of micro and small engineering enterprises in providing food security in Nigeria. Proceeding of the International Conference of the Nigerian Society of Engineers, Kano, Nigeria. Pg 98-105. 

57. Adewumi, B. A., Ogunlowo, A. S. and Ademosun, O. C. 2006a. Particle dynamics research initiatives at the Federal University of Technology, Akure, Nigeria. Proceeding 1st International Conference on Advances in Engineering and Technology. Uganda. July, 2006. Pp 315-320. 

58. Adewumi, B. A., Ogunlowo, A. S. and Ademosun, O. C. 2006b. Material classification in cross flow system. Proceeding 1st International Conference on Advances in Engineering and Technology. Uganda. July, 2006. Pp 321-325.

59. Adewumi, B. A. 2006. National content in technological development: Experience of India, lessons for Nigeria. Proceeding of the Nigerian Society of Engineers, Abeokuta, Nigeria. 4 – 8th Dec., 2006, pp 8.

60. Adewumi, B. A. 2007d. Indigenous technology and local content in a liberalized economy. Proceedings of Conference of the Institute of Engineers, Kenya, 10pp.

61. Adewumi, B. A, Sathyendra Rao, B. V., Kiran Kumar, N. L., Pratape V. M. and Srinivas, A. 2007. Grain classification using aerodynamic principles. Proceeding of the 8th African Crop Science Society Conference, El-Mania, Egypt, 27th – 31st Oct., 2007, pg 1799 – 1803. 

62. Adewumi, B. A. 2007e. Collaborative research in the development of food machinery for Africa. Proceedings of the Conference on Collaborative Research for Technological Development organized by Makerere University, Kampala, Uganda between 17th and 21st Dec., 2007, 10pp.

63. Adewumi, B. A, Sathyendra Rao, B. V., Kiran Kumar, N. L. and Ventakrishnan, L. (2007). Development of a cross flow classifier test rig. Proceedings of the International Agricultural Engineering Conference and publication in the Journal of the Asian Association of Agricultural Engineering, Thailand, Dec. 2007. 

64. Adewumi, B. A., Ologunagba, F. O., and Adedokun, A. I. (2007). Separation of legume hulls from cotyledon using hydro cyclone. Proceedings of the Particle Separation Conference, Toulouse, France, July, 2007. 

65. Adewumi, B. A. (2008). Velocity profiles of cowpea grains in cross flow system. Food Processing Automation Conference of the American Society of Agriculture and Biological Engineers, June 28 – 29, 2008, USA. 

66. Adewumi, B. A. (2008). 2-D modeling of grain transport and separation in the horizontal air stream. Food Processing Automation Conference of the American Society of Agriculture and Biological Engineers, June 28 – 29, 2008, USA.  

67. Adewumi, B. A. (2008). Collaborative research in food machinery development: An option for minimizing post harvest losses in Africa. The Tropentag Conference 2008, October, 2008. Germany.

68. Adewumi, B. A. and A. F. Alonge. (2008). Academia as catalyst in cluster development and net work: a case for consideration in the West Africa region. TCI Conference on Competitiveness, October, 2008. South Africa.

69. Adewumi B.A (2009).Cluster development: A global perspective. Invited paper presented at the PACF Stakeholders’ Forum. Organized by PACF-Nigeria, May 14 and 15, 2009 at Rockview Hotel, Wuse II, Abuja. 

70. Adewumi, O.O., Oke O.B., & Adewumi B.A (2009). Milk yield, milking time, milk flow rate of West African Dwarf, Yankasa and Crossbred ewes. 2009 ASABE Annual International Conference/ Meeting, Reno, Nevada, USA. June, 2009.

71. Famurewa J.A.V., Adewumi B.A and Dumade, I (2009). Storage stability of smoked fish as influenced by fat content and equilibrium moisture content. 2009 ASABE Annual International Conference/ Meeting, Reno, Nevada, USA. June, 2009. 

72. Adewumi B.A, and Alokun (2009). Storage Qualities of Cashew Juice in Ambient and Refrigerated Environments. Accepted for presentation for the Symposium on Advances in Post harvest Technology and Quality Assurance for Fruits and Vegetables of Interest for the Tropics. Costa Rica.

73. Odunmaku, A. A. A., Adewumi B.A, and Idris, M (2009). Paper presentation at the 30th Conference of the Canadian Nuclear Society. Mining and its tailing: The environmental and radioecological consequent in Nigeria. June, 2009. Canada.

74. Adewumi, B. A. 2009. Engineering in agriculture: a main rescue of ecomonic melt down in Nigeria and Africa. Proceedings of the Nigerian Society of Engineers, Oweri Nigeria. Dec., 2009.

75. Adewumi B.A, 2010. Agro-based alternatives to petroleum economy. Invited paper for presentation in the ‘Humboldt-Kolleg’ to be held at the Ladoke Akintola University of Technology, Ogbomoso, Nigeria. Jan., 2010.

D. Technical Papers / Book of Abstracts / Accepted Abstracts:

76. Adewumi B. A., Igbeka, J. C., Oloso, S. O, and Odunfa. S. O. (1989). Design, fabrication and testing of a powered locust bean steamer / dehuller. Paper presented at the ANSTI Conference, University of Ibadan, Nigeria. Sept., 1989. 18pp. 

77. Adewumi B. A., Igbeka, J. C., and Satimehin, A. A. (1990). Evaluation of the performance of in-crib storage for cob maize. Paper presented at the 14th Annual Conference and General Meeting of the Nigerian Society of Agricultural Engineers, Makurdi, Nigeria. 10pp. 

78. Adewumi B. A., Ogungbe, L. A., and Akintade, A. A. (1995). Performance of a brooding chamber for chicks. Paper presented at the 17th Annual Conference and General Meeting of the Nigerian Society of Agricultural Engineers, Akure, Nigeria.12pp.

79. Adewumi B. A. (1997d). Rice processing industry and the economic development of Ekiti and Ondo States. Paper presented at the workshop on the role of Science and Technology in the development of small and medium scale industries in Nigeria. Organised by the Centre for Research and Development, Ondo State University, Ado-Ekiti, Nigeria. 15pp. 

80. Adewumi, B.A. (1997e). Cocoa bean processing and drying equipment for small and medium scale industries. Paper presented at the workshop on the role of Science and Technology in the development of small and medium scale industries in Nigeria. Organised by the Centre for Research and Development, Ondo State University, Ado-Ekiti, Nigeria. 15pp. 

81. Adewumi B. A. (2000e). Production of food based secondary cocoa product and the allied industry in Nigeria. Paper presented at the 1st International Conference and Millennial General Meeting of the Nigerian Institution of Agricultural Engineers, Ibadan, and Nigeria.13pp. 

82. Adewumi B.A. (2000f). Agricultural Engineering Extension Services (AEES): A tool for rapid rural development in the new millennium. Paper presented at the 1st International Conference and Millennial General Meeting of the Nigerian Institution of Agricultural Engineers, Ibadan, and Nigeria.10pp. 

83. Adewumi, B. A. (2005c). Academic and professional aspects of engineering training in Nigeria. An invited paper delivered at the technical session of the meeting of the Akure Branch of the Nigerian Society of Engineers. March, 2005. 10pp. Nigeria.

84. Adewumi B. A., Ademosun, O. C and Ogunlowo, A. S. (2005). Research contributions to the development of a small/medium scale legume thresher. Paper presented at the International Conference on Science and Technology, Federal University of Technology, Akure, Nigeria.

85. Adewumi, B. A. (2005d). Professional report for the award of Fellow of the Nigerian Society of Engineers. Submitted to the Nigerian Society of Engineers, Nigeria. 2005. 50pp. 

86. Adewumi, B. A. (2006a). Exploring the protein resource of locust bean. Book of abstract of the colloquium on chemistry, nutrition and health at the Central Food Technological Research Institute, India. March, 2006.     

87. Adewumi, B. A. (2006b). Engineering applications in food safety and nutrition. Paper presented at the International Training Workshop on Food Safety and Nutritional Outreach, organized by the Central Food Technological Research Institution, Mysore, India (April 03-07, 2006). 

88. Adewumi, B. A. (2006c). Research innovations for poultry industry in Nigeria: Engineering Perspectives. Postal Presentation at the International Symposium on Building Leadership Skill in Food & Nutrition Essential for National Development held at the Central Food Technological Research Institute, Mysore 570 020, India on 23rd – 25th June, 2006.          

89. Adewumi, B. A. (2006d). My research focus in agricultural and food processing engineering. An invited power point seminar presentation at the Central Institute of Agricultural Engineering, Bhopal, India during a Technical Visit. 7th Aug., 2006.

90. Adewumi, B. A. (2008). Available agro-based alternatives to petroleum economy. Paper presented at the 2008 Environment day titled Climate Change (Kick the Habit: Towards a Low Carbon Economy organized by the Ondo State Ministry of Environment, Ondo State, Nigeria. 

91. Mangaraj, S., Adewumi, B. A., Rathore, A., and Kapoor, T. (2008). Development and evaluation of a flap mechanism polisher for pigeon pea dhal. CIGR International Conference of Agricultural Engineering, October 2008, Brazil.

92. Adewumi, B. A. (2009). Engineering in agriculture: a main rescue of ecomonic melt down in Nigeria and Africa. Invited paper presented at the the Technical session of the monthly meeting of the Abeokuta Branch of the Nigerian Society of Engineers at the NSE Secretariat, Abeokuta on July 9, 2009.

E. Edited Journal:

93. Journal of Engineering and Engineering Technology (FUTAJEET) Vol.1 No.1, 33pp. June, 1999. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the review of manuscripts and the editing of the Journal Publication).

94. Journal of Engineering and Engineering Technology (FUTAJEET) Vol.2 No.1, 48pp. June, 2000. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the review of manuscripts and the editing of the Journal Publication). 

95. Journal of Engineering and Engineering Technology (FUTAJEET) Vol.2 No.2, 48pp. December, 2000. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the editing of the Journal Publication).

96. Journal of Engineering and Engineering Technology (FUTAJEET) Vol. 3 No. 1, 49pp, June, 2002. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the review of manuscripts and the editing of the Journal Publication).

97. Journal of Engineering and Engineering Technology (FUTAJEET) Vol. 3 No. 2, 60pp. Dec., 2003. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the review of manuscripts and the editing of the Journal Publication). 

98. Journal of Engineering and Engineering Technology (FUTAJEET) Vol. 4 No. 1, 60pp. June, 2005. A publication of the School of Engineering and Engineering Technology, Federal University of Technology, Akure, Nigeria. (I was a reviewer/ assessor, and a member of the Editorial Board and participated fully in the review of manuscripts and the editing of the Journal Publication).

Last Updated on March 19, 2012 by admin

Leave a Reply