Adejuyigbe, S. B: Publications

1.    ADEJUYIGBE, S. B. (1983) – Industrial Development in Ondo State. HND Thesis in the Department of Mechanical Engineering. The Polytechnic, Owo, Ondo State of Nigeria.
2.    ADEJUYIGBE, S.B. and AKINLOSOSE, K.R. (1987a) – Ilesanmi Metalwork for Senior Secondary Schools, Book One. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 516 – 8
3.    ADEJUYIGBE, S.B. and AKINLOSOSE, K.R. (1987b) – Ilesanmi Metalwork for Senior Secondary Schools, Book Two. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 538 – 9
4.    ADEJUYIGBE, S.B. and AKINLOSOSE, K.R. (1987c) – Ilesanmi Metalwork for Senior Secondary Schools, Book Three. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 518– X
5.    ADESOKAN, L.A.; ADEJUYIGBE, S.B.; FAGBEMI, J.A. and ADEWALE, G. A. (1988a) – Ilesanmi Technical Drawing for Senior Secondary Schools, Book One. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 574 – 6
6.    ADESOKAN, L.A.; ADEJUYIGBE, S.B.; FAGBEMI, J.A. and ADEWALE, G. A. (1988b) – Ilesanmi Technical Drawing for Senior Secondary Schools, Book Two. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 574 – 7
7.    ADESOKAN, L.A.; ADEJUYIGBE, S.B.; FAGBEMI, J.A. and ADEWALE, G. A. (1988c) – Ilesanmi Technical Drawing for Senior Secondary Schools, Book Three. Ilesanmi Press (Educational Publishers) Limited. Imo Ilesa. Oyo State, Nigeria. ISBN 978 – 157 – 574 – 8
8.    ADEJUYIGBE, S. B. (1993a) – Computer Based Production Planning and Control System in Nigerian Industries. Post Graduate Diploma Thesis in the Department of Mechanical/Production Engineering of Enugu State University of Science and Technology, Enugu State of Nigeria.
9.    ADEJUYIGBE, S. B. (1993b) Planned Agricultural Mechanization for Abundant Food Production. Paper presented in the Nigerian Society of Engineers Conference, Kaduna. Conference Proceedings, pp 69-81.
10.    ADEJUYIGBE, S. B. (1994a) Computer Appreciation for Production Planning and Control in some Nigerian Industries. Paper presented in the Nigerian Institution of Production Engineers, First National Conference, Benin City. Conference Proceedings, pp 121-141.
11.     ADEJUYIGBE, S. B. (1994b) Production Engineering Education and Training in Nigeria: Evaluation of the Problems and Prospects. Paper presented in the Nigerian Institution of Production Engineers, First National Conference, Benin-City. Conference Proceedings, pp 104-120..
12.    ADEJUYIGBE, S. B. (1995a) The Impact of Manufacturing Industries on the Environmental Development   of Nigeria. Paper Presented at UNESCO-Nigeria National Committee for Man and Biosphere (MAB). Regional Training Workshop on Impact of Human Activities and Livestock Grazing Lands and Response of Human Savannah to Stresses and Disturbance in West Africa Sub-Region. (A member of the Local Conference Planning Committee). At The Federal University of Technology, Akure on July 23 – 28, 1995. Conference Proceedings, pp 445- 447.
13.    ADEJUYIGBE, S. B.(1995b) Critical Path Method as a Tool in System Design in Industrial Projects. A Seminar Paper Submitted as  Part of the Requirements for the Award of Master of Engineering (M.Eng.) in Production Engineering Graduate Seminar. Department of Mechanical Engineering, Federal University of Technology, Akure, Nigeria. June, 1995.
14.    ADEJUYIGBE, S. B. (1996) – The Planning of Continuity of Technological Education in Nigeria: A Critical Path Analysis Approach. A Journal of the Institute of Education, Delta State University, Abraka, Research in Education, Volume 2 No. 2, Sept. 1996, pp 22-36.
15.    ADEJUYIGBE, S. B. and ADEGOKE, C. O. (1996) The Role of Mechanical Engineers in Sanctioned Nigeria Economy. Paper presented at the Nigerian Society of Engineers, Mechanical Divisions Distinguished Lecture (MEDL) and AGM at National Engineering Center, Lagos, and 9th November 1996.
16.    ADEJUYIGBE, S. B. and OWOYEMI, J. M. (1997) Metal, the Age-Long Material for Industrial Products. Paper presented at the Maiden Conference on Industrial Design and Technology, FUT, Akure, 8th – 11th April1997. Books of Abstracts – page 3
17.    OWOYEMI, J. M. and ADEJUYIGBE, S. B. (1997) Wood, an Indispensable Industrial Material. Paper presented at the Maiden Conference on Industrial Design and Technology, FUT, Akure, 8th – 11th April 1997. Books of Abstracts – page 29.
18.    ADEJUYIGBE, S. B. (1997a) – Computer-Aided Design and Drafting (CADD) in Process Modeling of Sand Casting. M. Eng. Thesis in the Department of Mechanical/Production Engineering of Federal University of Technology, Akure.
19.    ADEJUYIGBE, S. B. (1997b) Metal Cutting Machine Tools. Engineering Textbook.  Publication for Universities, Polytechnics, Colleges of Education, Technical Colleges and Secondary Schools. Olajuyin Printers and TopFun Publications, Akure – 220 pages. ISBN 978-32744-3-0
20.    ADEJUYIGBE, S. B. (1998a) Professional Engineering Practice. Engineering Textbook. Publication for Universities, Polytechnics, Colleges of Education, Technical Colleges and Secondary Schools. TopFun Publications, Akure – 69 pages. ISBN 978-028-378-1.
21.    ADEJUYIGBE, S. B. (1998b) Engineering Law and Management. Engineering Textbook. Publication for Universities, Polytechnics, Colleges of Education, Technical Colleges and Secondary Schools. TopFun Publications, Akure – 70 pages. ISBN 978-028-377-3.
22.    ADEJUYIGBE, S. B. and OGUNLADE, O. (1998)-Computer-Aided Design (CAD) in Process Modeling of Sand Casting. Paper Presented in the Nigerian Institute of Engineers (Ibadan Branch) Conference, Ibadan. Conference Proceedings, Vol. 1 – pp 28-40.
23.    ADEJUYIGBE, S. B. (1998c) Setting Up Small-Scale Manufacturing Industry for Sustainable Development. Paper presented in the Nigeria Institution of Production Engineers 2nd National Conference, Benin City. Books of Abstracts – pages 23-24.Conference Proceedings. (Accepted)
24.    ADEJUYIGBE, S. B. (1998d) Forecasting the Performance of the Manufacturing Industries in Nigeria. Paper presented in the Nigerian Institute of Industrial Engineers (Ibadan Branch) Conference, Ibadan. Books of Abstracts – page 28
25.    FAPETU, O. P and ADEJUYIGBE, S. B. (1998) Alternative Energy Resources and Potentials in the Next Millennium. Paper presented at the 20th Annual Conference of the Nigerian Institution of Agricultural Engineers, September 9 – 11, 1998 at Lagos Airport Hotel, Lagos. Books of Abstracts – page 39
26.     ADEJUYIGBE, S. B. (1999a) Productivity Enhancement of Professional Technologist in the Conference of Nigerian Institute of Science Technology, FUT, Akure – 1999. Books of Abstracts
27.    ADEJUYIGBE, S. B. and OGUNLADE, O. (1999) Computer-Aided Design and Drafting (CADD) for Industrial Design and Development. Journal of Industrial Design, FUT, Akure. Maiden Issue, Vol. 1(1): May 1999 pp 83-89.
28.    ADEJUYIGBE, S. B. (1999b) The Development and Restructuring of Machine Tool Industry: The Case of Nigeria Machine Tools, Osogbo. Paper presented in the Nigerian Institute of Industrial Engineers (Ibadan Branch) Conference, Ibadan. Books of Abstracts – page 9
29.    ADEJUYIGBE, S. B.; MORKA, P. N. and OLOGUNLEKO, A. O (1999) Palm Oil as an Alternative to Soluble Oil in Machining a Mild Steel Material. Journal of Science, Engineering Technology (JSET), Enugu, Volume 6 No. 2 of June 1999, pp 1765-1778. Accepted 12th July 1998.
30.    ADEJUYIGBE, S. B. (1999c) An EOQ Model for Raw Material Demand in a Jobbing Shop. Nigeria Society of Engineers Technical Transaction Journal, Lagos. October – December 1999, Vol. 34(4) pp 55 – 63. Accepted 12th October 1998.
31.    ADEJUYIGBE, S. B. and ADEROBA, A. A (2000)    An Appraisal of Foundry Technology in Nigeria. Nigerian Journal of Engineering Management, Ondo. April 2000, Vol. 1, No.2, pp 1-12.
32.    ADEJUYIGBE, S. B. and OKE, I. O. (2000) Design, Fabrication and Performance Evaluation of Domestic Water Treatment Plant. Nigerian Journal of Engineering Management, Ondo. April 2000, Vol. 1, No.2, pp 23-33.
33.    ADEJUYIGBE, S. B. and AYODEJI, S. P. (2000)    Groundnut Oil as an Alternative Lubricant for Machining Mild Steel Material. Journal of Applied Science (JAS), Enugu, Vol. 3 No. 2 of August 2000, pp 848-863. Accepted 13th September 1999.
34.    ADEJUYIGBE, S. B. and ADEYEMI, H. O.  (2000) Ergonomic Assessment of Mass Transit Vehicles. Nigerian Journal of Engineering Management, Ondo. Volume 1, No. 3 of July – September 2000, pp 44-50.
35.    ADEJUYIGBE, S. B. and AYODEJI, S. P. (2000) Soybean Oil as an Alternative to Soluble Oil in Machining a Mild Steel Material. The Nigerian Journal of Pure and Applied Physics a Federal University of Technology, Akure. Vol. 1 No. 1 pp 17-23.
36.    ADEJUYIGBE, S. B. (2000) Tools Design for Metal Cutting. Engineering Textbook. Publication for Universities, Polytechnics, Colleges of Education, Technical Colleges and Secondary Schools. Publications, Akure – 220 pages. ISBN 978-34859-2-X.
37.    ADEJUYIGBE, S. B. (2001) Incessant Burst of Crude Oil Pipeline in Nigeria. Nigerian Journal of Engineering Management, Ondo. Volume 2, No. 2 of July-September, 2001, pp 44-49.
38.    ADEJUYIGBE, S. B. (2002a) – A Computer-Aided Design (CAD) of Sand Casting Operations. PhD Thesis in the Department of Mechanical/Production Engineering, Federal University of Technology, Akure, Nigeria
39.    ADEJUYIGBE, S. B. (2002b) Production Management (Design, Planning, Control and Implementation). Engineering Textbook. Publication for Universities, Polytechnics, Business Schools and Technical Colleges. TopFun Publications, Akure – 150 pages, A4 size. ISBN 978-34859-1-1.
40.    ADEJUYIGBE, S. B. (2002c) CAD/CAM for Manufacturing. Engineering Textbook. Publication for Universities, Polytechnics, Business and Technical Colleges. TopFun Publications, Akure – 135 pages, A4 size. ISBN 978-34859-3-8.
41.     ADEJUYIGBE, S.B. (2002d) – An Appraisal of Automated Foundry Technology in Nigeria. The Feature Article of Bi-Annual Investment and Information. Bulletin of Raw Materials Research and Development Council (RMRDC), Lagos State Liaison Office, July-Dec. 2002, Vol. 4 No 2 pp 9-13
42.     OGEDENGBE, T. I.; ADEJUYIGBE, S. B and ADEROBA, A. A (2002)-The Application of Computer Integrated Manufacturing in Nigeria. Nigerian Journal of Engineering Management (NJEM), Ondo.  Vol. 3; No. 3 of July – September 2002, pp 10 – 16.
43.    OLOGUNLEKO, A.O. ADEKOLA, A.S. and ADEJUYIGBE, S.B. (2002)- Alternative Coolant to Soluble Oil in Machining Mild Steel Materials. African Journal Online, Global Journal of Pure and Applied Sciences. Vol.8, No. 4 pp 535-538.
44.    ADEJUYIGBE, S.B. and ADEROBA, A.A. (2003) – Computer Aided Re-Layout of Sand Casting Foundry Shop. Nigerian Journal of an Engineering Research and Development (NJERD), Ondo, Ondo State. Jan – March 2003, Vol. 2, No. 1, pp 29-33.
45.    ADEJUYIGBE, S.B. (2003a) – A Sequential Computer Aided Design and Drafting (CADD) Model for Sand Casting. Journal of Science and Technology Research.  An interdisciplinary approach to Science and Technology Research for development.  An Official Publication of the International Research and Development Institute. Department of Mechanical Engineering, University of Uyo, Akwa Ibom State, Nigeria. Accepted 10th December 2002.  Vol. 2 No. 1 pp 18 – 23.
46.    ADEJUYIGBE, S. B. (2003b) Engineering and Technology: A Viable Profession for the Development of a Nation.  Paper presented in the Nigerian Society of Engineers, Akure Branch.  Proceedings of 2003 Annual Conference, Ondo State Library Complex, Akure.  pp 34 – 43.
47.    ADEJUYIGBE, S. B. (2003c) The Impact of Manufacturing Industries on the Environmental Activities in Nigeria. Submitted to Journal of Environmental Technology, Department of Architecture, Federal University of Technology, Akure, Nigeria.
48.    ADEJUYIGBE, S.B., MOGAJI, P. B. and ADEROBA, A.A.(2003)- A Generalized Computer- Aided Cost Estimation for Sand Casting Product. Association for Advancement of Modeling and Simulation Techniques in Enterprises (ASME) Journal 16 Av. Grange Blanche, 69160 Tassin La Demi- Lunce, France. Modeling D. Vol. 24 n° 2 pp 30- 41. Accepted June 20, 2003. No 02 398(29). – Foreign Publication
49.     ADEJUYIGBE, S. B. and ALI, D. M. (2004) – Ergonomic Evaluation of Furniture in Higher Institution; A Case Study. Nigerian Journal of Industrial and Systems Studies (NJISS) Vol.3, No 1 pp 24-30 Ondo, Nigeria. Accepted 20th February 2004.
50.    ADEJUYIGBE, S. B. and OYEDELE, A. O. (2004) – Design and Construction of a Die Casting Mould Suitable For Production of Various Sizes of Key Blanks. Nigeria Journal of Pure and Applied Physics. Department of Physics, Federal University of Technology, P.M.B. 704, Akure, Nigeria.Vol. 3 No 1 pp 16-20 of December 2004. Accepted 31st October 2003.
51.    ADEJUYIGBE, S.B. (2004a) Canonical Model for Planning Agricultural Production. Paper Presented at the 2nd West African Society of Agricultural Engineers International Conference on Agricultural Engineering. Organized by the West Africa Society of Agricultural    Engineering    (WASAE) and The Ghana Society of Agricultural Engineering (GSAE) under the Auspices of The Ghana Institution of Engineers (GhIE) at Kwame Nkrumah University of Science and Technology, Kumasi, Ghana, on 20th-24th September; 2004. Conference    Proceedings, pp 380-395- Foreign Publication
52.    ADEJUYIGBE, S. B. (2004b) Effect of Certain Additives on the Performance of Groundnut Oil as   an Alternative   Lubricant to Soluble Oil in Machining Mild Steel Material. Paper Presented in the Conference of Materials Society of   Nigeria (NIMACON – 2003).  2nd Nigerian Material Congress, Engineering Materials Development Institute (EMDI) Akure. – Published in the Proceedings of the NIMACON-2004. – pp 58-63
53.    ADEJUYIGBE. S, B. (2004c) Computer –Aided Engineering (CAE) – Concept, Challenges and Motivation in a Developing Country: Nigeria as a Case Study. Paper Presented at the   International Fourth School of Engineering Research Retreat (SERR 4) of Kwame Nkrumah University of Science and Technology (KNUST), Kumasi, Ghana, August 4 – 5, 2004. Foreign Publication
54.    ADEJUYIGBE, S. B. (2004d) –Machine Installation, Mounting Shaft Alignment and Balancing, 3- Days Workshop on Machinery and Equipment Maintenance Course Organized By Ekiti State Local Government Service Commission In conjunction with Excel Consulting Ltd, Akure from 17th -19th March; 2004 at Oye Ekiti. Workshop Manual. pp 8-18.
55.     ADEJUYIGBE, S. B. (2004e) – Lubricants, Lubrication, Gaskets and Seals. 3-Days    Workshop on Machinery and Equipment Maintenance Course Organized by Ekiti State Local Government Service Commission In conjunction with Excel Consulting Ltd, Akure from 17th -19th March; 2004 at Oye Ekiti. Workshop Manual pp 18-25.
56.    ADEJUYIGBE, S.B. and SABA, O.S. (2004) Expert System in Process Planning for Polymer Products. Submitted to Ghana Institution of Engineers (GhIE), Accra, Ghana. – Foreign Publication
57.    ADEJUYIGBE, S.B. [2005a] Project Evaluation and Review Techniques [PERT]: A Planning Tool towards the Development of Manufacturing Industries in Ekiti State. Paper Presented at The First Engineering Forum, School of Engineering, The Polytechnic, Ado Ekiti, Nigeria.   Conference Proceedings pp 33-39
58.    ADEJUYIGBE, S.B. AND AYODEJI, S.P. [2005] Technical Assessment of Welding Process       Automation in Western Nigeria. Paper Presented at The First Engineering Forum, School of   Engineering, The Polytechnic, Ado Ekiti, Nigeria. Conference Proceedings pp 54 –59.
59.    ADEJUYIGBE, S. B. and DAHUNSI, O.A. (2005) A Study of Small and Medium Scale Industrial Development in Ondo State. Paper Presented at The International Conference on Science and Technology. Organised by The Federal University of Technology, Akure, Nigeria. Conference Proceedings pp 535-542. Au Journal of Technology, Assumption University (ABAC), Hun Mak Bangkok, Thailand. Accepted on 17th December, 2008  – Foreign Publication
60.    ADEJUYIGBE, S.B. and BOLAJI, B.O. (2005) Design, Fabrication and Performance Evaluation of Bean Dehuller. Journal of the University of Science and Technology, (JUST) Kwame University of Science and Technology, Kumasi, Ghana June, 2005, Vol. 25 No 1 pp 125-132.-  Foreign Publication
61.    ADEJUYIGBE, S.B.; BELLO, E.I. and AGBOOLA, B.S. (2005) Development of an Internal Combustion Engine Valve Installation Machine. The Federal University of Technology, Akure. International Journal of the School of Engineering (FUTAJEET), Akure, Nigeria. Vol .4 No. 1 pp  23-31.
62.     ADEJUYIGBE, S. B. (2005b)    Cost-to-Worth Value Engineering Analysis of Manufacturing     Industries in Nigeria. Nigeria Journal of Pure and Applied Physics. Department of   Physics, Federal University of Technology, P.M.B. 704, Akure, Nigeria. June, 2005, Vol, 4 No 1 pp 16-24.
63.    ADEJUYIGBE, S.B. (2005c) A Computer Aided Process Planning of Aluminum Coating: A Case Study. Journal of Ghana Institution of Engineers (GhIE), Accra, Ghana.Vol. 3 No. 2 of December 2005.pp 39-52. – Foreign Publication.
64.    ADEJUYIGBE, S. B. (2005d) Integrated Computer Aided Design (CAD) Database System in Sand Casting Operations. Journal of the University of Sciemce and Technolgy, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana – Foreign Publication.
65.    ADEJUYIGBE, S. B. (2005e) Effective Methods of Teaching Subject in Technology: Mechanical, Production, and Metalwork Subjects. Submitted to Educational and Vocational Measurement (WAJEVM), WAEC, Onipanu, Lagos.
66.    ADEJUYIGBE, S.B. (2006a) CAD/CAM in Nigeria Manufacturing Industries. The Case of Nigerian Casting Industries. Journal of Engineering and Applied Sciences. Medwell Online, ANSInet Building, 308- Lasani Town, Sagodha Road, Faisalabad- 38090, Pakistan. Accepted 31st April, 2006.Vol. 1 No 3 pp 268-272. – Foreign Publication.
67.    ADEJUYIGBE, S.B. (2006b) Industrial Automation in Ghanaian Industries (The Case of Kumasi Metropolis). Journal of Engineering and Applied Sciences. Medwell Online, ANSInet Building, 308- Lasani Town, Sagodha Road, Faisalabad- 38090, Pakistan. Accepted 19th May, 2006.Vol.1 No 4 pp 383-393. – Foreign Publication.
68.    OYELAMI A.T. and ADEJUYIGBE, S.B. (2006) The Design of a Radiation- Recuperative Heat Exchanger for a 200kg Capacity Rotary Furnace. Au Journal of Technology, Assumption University (ABAC), Hun Mak Bangkok, Thailand. October, 2006.Vol 10 No 2 pp 93-100. Foreign Publication.
69.    BOLAJI, B.O. and ADEJUYIGBE, S.B. (2006) Vehicle Emissions and their Effects on the Natural Environment- A Review. Journal of the Ghana Institution of Engineers, Vol. 4 No 1, June, 2006 pp 35-40. – Foreign Publication
70.     ADEJUYIGBE, S.B. (2006c) Computer Aided Manufacturing of Sand Casting Products Journal of Engineering and Applied Sciences. Medwell Online, ANSInet Building, 308- Lasani Town, Sagodha Road, Faisalabad- 38090, Pakistan. Vol. 2 No.8 pp 1240-1250. – Foreign Publication.
71.    ADEJUYIGBE, S.B. (2006d) The Planning of Continuity of Technological Education in West Africa using The Critical Path Method: Nigeria and Ghana as a Case Studies. Publication in the Book Series: Advance Materials Research, Publish by Trans Tech Publications Ltd., Switzerland, London, USA, Vols. 18-19 (2007) pp  389-396. – Foreign Publication.
72.    ADEJUYIGBE, S.B. (2006e) Forecasting the Product Demand for a Bottling Company at Kumasi,   Ghana. Journal of Applied Science and Technology (JAST) Council for Scientific and Industrial Research (CSIR), Accra Ghana. Vol. 13 Nos 1& 2, 2007 pp  – Foreign Publication
73.    ADEJUYIGBE, S. B.(2006f) The Analysis of Manufacturing Sector Problems in West Africa:    Nigeria and Ghana as a Case Studies. Paper Presented at The International Conference on Engineering Research and Development Impact on Industry. Organised by The Faculty of Engineering, University of Benin, Benin, Nigeria. Conference Proceedings. Pp  69-77
74.    ADEJUYIGBE, S. B. and AKINNULI B.O.(2006): Design, Moulding and Performance  Evaluation of Cylindrical Fibre- Cement Silo for Storing Two-Tonnes of Maize. Paper   Presented at The International Conference on Engineering Research and Development Impact on Industry. Organised by The Faculty of Engineering, University of Benin, Benin, Nigeria. Conference Proceedings. pp 104-111
75.    ADEJUYIGBE, S.B. (2006g) Indigenous Technology: Creating an Enabling Environment for Industrialization. Paper Presented as the Lead Paper at the Conference of Nigerian Association of Engineering Craftsmen (Under the Auspices of Council for the Regulation of Engineering in Nigeria COREN) National Engineering Conference /AGM, Akure, 2006. Conference Proceedings, pp 1-7.
76.    ADEJUYIGBE S.B. (2006h) Conventional Engine Systems and Operation in a Mechatronic World. A Paper Presented as a Guest Lecturer at the Workshop on Vehicle Maintenance, Workshop Ethics, and Mechatronics for Auto Technicians. Organised by Peugeot Automobile Nigeria Limited (PAN), National Automotive Council (NAC) and Auto-Aero Nigeria Limited, Abuja. Workshop Manual pp 87-103.
77.    ADEJUYIGBE, S.B. and ADESONA, S. (2007) Technical Assessment of Mechanic Village of Lagos State, Nigeria- Layout Model Development. Submitted to International Journal of Engineering and Engineering Technology (FUTA, JEET), Federal University of Technology, Akure, Nigeria.
78.    MOGAJI, P.B and ADEJUYIGBE.S.B. (2007) Computer Aided Costing for Sand Casting Products using Product Mix Model. Submitted to Nigeria Journal of Pure and Applied Physics. Department of   Physics, Federal University of Technology, P.M.B. 704, Akure, Nigeria
79.    ADEJUIYGBE, S. B. and SABA, O.S (2007) Appraisal for the use of Computer Aided Design and Drafting (CADD) in Tertiary Institutions in Nigeria. Submitted to the Jpournal of Vocational and Technical Education (JOVTED), Yola- Hong.
80.     ADEJUYIGBE.S.B. (2007a) The Appraisal of Communication and Automation in Nigerian Industries. Submitted to Ghana Journal of Science, National Science and Technology Press, Council for Scientific and Industrial Resource, Accra, Ghana – Foreign Publication
81.    ADEJUYIGBE, S.B. (2007b) Engineering the Bedrock of Nigeria Development and Sustenance. Paper Presented in the Career Talk to the Youth of Ondo Town at High Chief (Sir) Olabanji Akingbule, Central  Library Ondo, 3rd Floor, Lady Oseyemi Akingbule Hall, on 15th May; 2007.
82.    ADEJUYIGBE, S.B. (2007c) Development of a Pineapple Fruit Juice Extractor. Nigerian Journal of Engineering Research and Development (NJERD), Ondo, Nigeria. Accepted on 27th Feb. 2007 Vol.6, No.1 pp 18-27.
83.    ADEJUYIGBE, S.B. and OGBEIDE, S. (2007) Development of Computer Software for Modeling Cement Production Process. International Research Journal in Engineering Science and Technology, Department of Materials and Metallurgical Engineering, Federal University of Technology, Owerri. June, 2007. Vol. 4 No 2 pp 38-55.
84.     ADEJUYIGBE, S.B. (2007d) Applied Manufacturing Engineering Processes. Engineering Textbook Publications for Universities, Polytechnics, Business and Technical Colleges. TopFun Publications, Akure – 325 pages, A4 size. ISBN 978-34659-8-9.
85.    ADEJUYIGBE, S.B. MOGAJI, P.B. and ODUFALE, O. (2007) Development of Computer Aided Design Software for Jigs and Fixtures for Drilling Flanges. Submitted to Nigeria Journal of Pure and Applied Physics. Department of   Physics, Federal University of Technology, P.M.B. 704, Akure, Nigeria
86.    OYELAMI A.T. and ADEJUYIGBE, S.B. (2007) Software Development for the Design of a Recuperator- Incorporated Rotary Furnace. Association of Advanced Simulation Techniques in Enterprises (ASME) Journal. 16 Av. Garage Blanche, 69160 Tassim La Demi- Lunce, France. Accepted on 12th Sept., 2006. Vol. 76 no 5 pp 1-13 – Foreign Publication
87.    BOLAJI, B.O., ADEJUYIGBE, S.B., AND AYODEJI, S.P. (2008) Performance Evaluation of a Locally Developed Cassava Chipping Machine. South Africa Journal of Industrial Engineering, University of Pretoria, Pretoria, South Africa- Accepted, August, 2007. Vol.19 No 1 pp 169-178- Foreign Publication
88.    ADEJUYIGBE, S.B. (2008a) Ownership and Leadership in Manufacturing. Au Journal of Technology, Assumption University (ABAC), Hun Mak Bangkok, Thailand. Accepted on 20th June 2007 –   11(4) pp 256-260. – Foreign Publication
89.    ADEJUYIGBE, S. B. (2008b) Our Homes in All Seasons. Topfun Science and Engineering Books Publication, Akure, Nigeria. A Christian Textbook Publication for All Christians, ISBN 978-34859-9-7.
90.    ADEJUYIGBE.S.B. (2008c) Evaluation of Small-Scale Industrial Set-Up and Their Profits (A Case Study of Akure South Local Government, Nigeria). Journal of Science and Technology Research.  An interdisciplinary approach to Science and Technology Research for Development.  An Official Publication of the International Research and Development Institute. Department of Mechanical Engineering. University of Uyo, Akwa Ibom State, Nigeria- Accepted on 12th July, 2007. Published.
91.    AYODEJI, S.P. AND ADEJUYIGBE, S.B. (2008) Anthropometry Survey of Nigeria Paraplegics. Journal of the University of Science and Technology, (JUST) Kwame University of Science and Technology, Kumasi, Ghana December,, 2008, Vol. 28 No 3 pp70 – 89 –  Foreign Publication
92.    ADEJUYIGBE, S.B., ADEOYE, H.A., MOGAJI, P.B., and AWOPETU,O. (2008); Computer Aided Model Development for Automatic Tool Wear Detection in Machining Operations, Journal of the University of Science and Technology (JUST),Kwame University of Science and Technology, Kumasi, Ghana. December,, 2008, Vol. 28 No 3 pp 48 – 57  – Foreign Publication
93.    AYODEJI, S. P. and ADEJUYIGBE, S. B.(2008) Development of CAD Software for Wheel Chair Design. Journal of the University of Science and Technology (JUST),Kwame University of Science and Technology, Kumasi, Ghana December, 2008, Vol. 28 No 3 pp 82 – 93 -Foreign Publication
94.    ADEJUYIGBE, S.B. and ADEKUNLE, A.A. (2008) Computer Aided Design and Drafting (CADD) Modeling for Gas Welding Process. Paper Presented in the 2nd International Conference on Engineering Research and Development: Innovation.  15th – 17th April, 2008.. Organised by the Faculty of Engineering, University of Benin, Benin City. Conference Proceedings. Pp 549-554.
95.    KAREEM, B., ADEJUYIGBE, S.B., and AYODEJI, S.P. (2008) Survey of the Development in Automotive Materials: Peugeot Model as a Case Study.  Paper Presented in the 2nd International Conference on Engineering Research and Development: Innovation. 15th – 17th April, 2008. Organised by the Faculty of Engineering, University of Benin, Benin City. Conference Proceedings. Pp522-528.
96.    ADEJUYIGBE, S.B., and ADEBOWALE, O.S. (2008) Computer Aided Drafting of Motorcycle Assembly Paper Presented in the 2nd International Conference on Engineering Research and Development: Innovation. 15th – 17th April, 2008. Organized by the Faculty of     Engineering University of Benin, Benin City.  Conference Proceedings. Pp1255-1264
97.    ADEJUYIGBE, S.B., MOGAJI, P.B. and BADA, M.T. (2008) Computer Aided Model for Casting Aluminum using Die Casting. Paper Presented in the 2nd International Conference on Engineering Research and Development: Innovation. 15th – 17th April, 2008. Organised by the Faculty of Engineering, University of Benin, Benin City. Conference Proceedings. pp 555.
98.    ADEJUYIGBE, S.B., AYODEJI, S.P. and DAFE, T, S. (2008) Development of Auxiliary   Equipment for Improved Reliability of Tyre. Paper Presented in the 2nd International Conference on Engineering Research and Development: Innovation.  15th – 17th April, 2008. Organised by the Faculty of Engineering, University of Benin, Benin City. Conference Proceedings. pp709.
99.    ADEJUYIGBE, S.B. (2008) Destiny and Determination Nurtured by God, The Autobiography of Professor Pastor Samuel Babatope Adejuyigbe. TOPFUN Publications Akure, Nigeria ISBN 978 34859 9 7 – 166 pages.
100.    ADEJUYIGBE, S.B. and AYENI, J.A. (2009) Computer Aided Raw Material Requirement Planning (CARMRP) for Job Shop: A Case Study. Paper Presented in the 2nd International Conference on Engineering Research and     Development: Innovation. Research and Development: Innovation. 15th – 17th April, 2008. Organised by the Faculty of Engineering, University of Benin, Benin City. Conference Proceedings. Pp1265-1273.  Publication in the Book Series: Advance Materials Research, Publish by Trans Tech Publications Ltd., Switzerland, London, USA, Vols. 62- 64(2009) pp 592- 598. – Foreign Publication.
101.    ADEJUYIGBE, S. B. and OSASONA, A. P. (2009) Development of a Prototype Incubator for Poultry Birds. Submitted to Journal of the University of Science and Technology (JUST),Kwame University of Science and Technology, Kumasi, Ghana. – Foreign Publication.
102.    ADEJUYIGBE, S.B. and .AYODEJI, S.P. (2009)  Casting and Performance Evaluation of Pump Housing and Impeller using Local Raw Materials, Submitted to Journal of the University of Science and Technology (JUST),Kwame University of Science and Technology, Kumasi, Ghana – Foreign Publication
103.    ADEJUYIGBE, S. B. and BOLAJI, B. O. (2009) Development of a Solar Photovoltaic Power System to Generate Electricity for Office Appliances. Submitted to Journal of the University of Science and Technology (JUST),Kwame University of Science and Technology, Kumasi, Ghana – Foreign Publication
104.    ABADARIKI, S. O. ADEJUYIGBE, S. B. and OLAREWAJU,S. O. (2009) Design of Single Point Lathe Cutting Tool for Turning Plastic Materials. Submitted to Journal of Applied Science and Technology (JAST), Accra, Ghana. – Foreign Publication
105.    ADEJUYIGBE, S. B. and DAFE, T.S. (2009) Development of a Tyre Removing and Fixing Equipment. Submitted to Journal of Applied Science and Technology (JAST), Accra, Ghana. – Foreign Publication

Leave a Reply