Ismaila, S. O: Publications

i.   Publications In Learned Journal

1. Ismaila, S. O., Odedoyin, O. P. & Ajisegiri, G. O. (2016): Models to estimate the palm surface area of students in a tertiary institution in Abeokuta, Nigeria. Cogent Engineering 3 (1173777); 1-7, Published by Taylor and Francis, United Kingdom.

 

2. Udo, S. B., Adisa, A. F., Ismaila, S. O. & Adejuyigbe, S. B. (2015): Development of palm kernel nut cracking machine for rural use. Agricultural Engineering International: CIGR Journal 17(4); 397-406, Published by International Commission of Agricultural and Biosystems Engineering-CIGR, Japan.

 

3. Udo, S. B., Adejuyigbe, S. B., Ismaila, S. O. & Adisa, A. F. (2015): Performance Evaluation of a Palm Kernel Nut Cracking Machine. Journal of Natural Science, Engineering and Technology, 14(1), 111-116.

 

4. Ismaila, S.O., Akanbi, O. G. & Olaoniye, W. (2015): Model for predicting peak expiratory flow rate of Nigerian workers in a cement factory in Itori, Ogun State, Nigeria. International Journal of Occupational Safety and Ergonomics 21(4); 547-550, Published by Taylor and Francis, United Kingdom.

 

5.  Akanabi, O. G., Ismaila, S. O. & Awodol, J. G. (2015): Quantitative Methods In The Designs of Organizations: A Model and a Real World Application. Technical Journal 9(2); 121-127, Published By University North, Croatia.

 

6.  Musa, A. I., Ismaila, S. O., Waheed, M. A. & Olayanju, T. M. A. (2015): Subjective Approach to Human Physiological Responses to Outdoor Condition During Blocklaying in Ogun State, Nigeria. Nigerian Journal of Technology (NIJOTECH) 34 (3); 438  442, Published by Faculty of Engineering, University of Nigeria, Nsukka.

 

7. Adeyemi, H. O., Adejuyigbe, S. B., Ismaila, S. O. & Adekoya, A. F. (2015): Low back pain assessment application for construction Workers. Journal of Engineering, Design and Technology 13 (3); 419-434, Published by Emerald Group Publishing Limited, United Kingdom.

8. Ismaila, S. O., Akanbi, O. G., Oderinu S. O., Anyanwu B. U., Alamu, K. O.  (2015): Design of Ergonomically Compliant Desks and Chairs for Primary Pupils in Ibadan.  Journal of Engineering Science and Technology 10 (1); 35  46, Published by School of Engineering, Taylors University, Malaysia.

9. Akanbi, O.G., Ismaila, O., Olaoniye, W., Oriolowo, K. T. & Odusote, A. (2014): Assessment of Post-Work Peak Expiratory Flow Rate of Workers In Cement Company. Sigurnost (Safety) 56 (4); 315  322, Published by Institute of Safety Research and Development, Croatia.

10.  Ismaila, S.O., Akanbi, O.G. & Ngassa, C.N. (2014): Models for estimating the anthropometric dimensions using standing height for furniture design. Journal of Engineering, Design and Technology 12 (3); 336-347, Published by Emerald Group Publishing Limited, United Kingdom.

11. Musa A. I., Ismaila S. O., Adejuyigbe S. B. & Akinyemi O.D. (2011): Ergo- effects of designed school furniture and sitting positions on students’ behaviour and musculo-skeletal disorder in Nigerian tertiary institutions. Management Science Letters 1; 331-334, Published by Growing Science, Ontario, Canada. Available online at www.GrowingScience.com//j.msl.2011.03.002

12. Ismaila S.O., O.G. Akanbi & S.O. Oderinu (2010): Anthropometric Survey and Appraisal of Furniture for Nigerian Primary School Pupils. e-Journal of Science and Technology. 4 (5); 29-36, Published by Technological Education Institute, Athens, Greece. Available online at www.e-jst.teiath.gr/issue_17/Ismaila_17.pdf

13. Ismaila S.O. & O.E.Charles-Owaba (2010): A Review of Manual Load Lifting Models. Leonardo Journal of Sciences. 16(9); 47-58, Published by Academic Direct Publishing House (Technical University of Cluj-Napoca, Romania). Available online at www.ljs.academicdirect.org/A16/047_058.pdf

14.  Ismaila S.O., O.G. Akanbi, N.O. Adekunle, O.R. Adetunji & S.I. Kuye (2010): An Ergonomics Assessment of Passenger Seats in Buses in South Western Nigeria. Sigurnost. 52(4); 329-334, Published by Institute of Safety Research and Development, Croatia. Available at          www.hrcak.srce.hr/index.php?show=toc&id_broj=4991

15.  Ismaila, S.O., O.E. Charles-Owaba, O.J. Alamu & O.G. Akanbi (2010): Estimating Load on the Spine using Spinal Shrinkage. Leonardo Journal of Sciences. 16(9); 117-124. Published by AcademicDirect Publishing House (Technical University of Cluj-Napoca, Romania). Available online at  www.ljs.academicdirect.org/A16/117_124.pdf  

16. B.O. Bolaji, G.A. Bolaji & S.O. Ismaila (2010): Performance evaluation of a locally developed domestic drinking water filter. International Journal of  Environmental Studies.67 (5);763-771, Published by Taylor and Francis. Available online at dx.doi.org/10.1080/00207233.2010.514107

17. Ismaila, S.O. (2010): Ergonomics Awareness in Nigeria. Australian Journal of Basic and Applied Sciences. 4 (5); 731-734, Published by International Network for Scientific Information. Available online at www.insipub.com/ajbas/2010/731- 734.pdf

18. Ismaila, S.O. & O.G. Akanbi (2010): Study on the Use of Seat Belt by Nigerian  Drivers. Australian Journal of Basic and Applied Sciences. 4 (3); 494-497, Published by International Network for Scientific Information. Available online at www.insipub.com/ajbas/2010/494-497.pdf   

19. Ismaila, S.O.; O.G. Akanbi; N.O. Adekunle & O.E. Charles-Owaba (2009):   Current Trends of Vehicular Accidents. Pacific Journal of Science and Technology.10(2); 262-269, Published by Akamai University, USA. Available online at www.akamaiuniversity.us/PJST10_2_262.pdf

20. Ismaila, S.O.; S.B. Adejuyigbe & O.J. Alamu (2009): Analysis of Accidents in a Refrigerator Producing Company. Pacific Journal of Science and Technology.    10(2); 255-261, Published by Akamai University, USA. Available online at www.akamaiuniversity.us/PJST10_2_255.pdf

21. Ismaila, S.O. (2009): Anthropometric data of hand, foot and ear of University Students in Nigeria. Leonardo Journal of Sciences. 15(8); 15-20, Published by Academic Direct Publishing House (Technical University of Cluj-Napoca, Romania). Available online at www.ljs.academicdirect.org/A15/015_020.pdf

22. Ismaila, S.O., O.G. Akanbi & O.E. Charles-Owaba (2009): Cost Minimization Approach to Manpower Planning in a Manufacturing Company. Pacific Journal of  Science and Technology. 10 (1);191-196, Published by Akamai University, USA. Available online at www.akamaiuniversity.us/PJST10_1_191.pdf

23. O.J. Alamu; E.A. Adeleke; N.O. Adekunle & S.O. Ismaila (2009): Power and Torque characteristics of Diesel Engine Fuelled by Palm Kernel Biodiesel. Leonardo Journal of  Sciences. 14 (8); 66-73, Published by AcademicDirect Publishing House (Technical University of Cluj-Napoca,
Romania). Available online at www.ljs.academicdirect.org/A14/066_073.pdf

14. Ismaila, S.O. (2008): Anthropometric data of the foot of Nigerian University Students.  Ergonomics SA. 20 (2); 45-50, Published by Ergonomics Society of South Africa. 

15. Ismaila, S.O. & O.E. Charles-Owaba (2008): Determination of Highest Permissible Spinal Shrinkage. Australian Journal of Basic and Applied Sciences. 2(4); 872-875, Published by International Network for Scientific Information. Available online at www.insipub.com/ajbas/2008/872-875.pdf

16. Ismaila, S.O. & Charles-Owaba, O.E. (2006): Effects of Work and Age on Spinal Shrinkage. Journal of Applied Science, Engineering and Technology. 6 (1 &2); 8-15, Published by Faculty of Technology, University of Ibadan. Available online at www.ajol.info/index.php/jaset/search/titles?searchPage=2

ii)     Conference Proceedings:
17. Ismaila, S.O., Oriolowo K.T. and Akanbi O.G. (2011): Energy Expenditure   Requirements of Bricklaying in South Western Nigeria. Proceedings of Human Factors in Organizational Design and Management-X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, C.J. Christie, S. Zschernack, A.I. Todd and M. Mattison (Eds.) II-337-341. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.

18. Musa A.I., Ismaila, S.O., Adejuyigbe S.B. and Akinyemi O.D. (2011):  Ergonomic Evaluation and Design of Tables and Chairs for use in Tertiary Institutions in Nigeria. Proceedings of  Human Factors in Organizational Design and Management-X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, C.J. Christie, S. Zschernack, A.I. Todd and M. Mattison (Eds.) II-201-206. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.

19.  Ismaila, S.O., Akanbi O.G., Daniel O. I. Musa A. I. and Sanusi H. O. (2011): Ergonomic Evaluation of Welding Workplace. Proceedings of Human Factors in Organizational Design and Management-X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, C.J. Christie, S. Zschernack, A.I. Todd and M. Mattison (Eds.) I-401-406341. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.

20. Ismaila, S.O., Odetokun, B.D. and Bolaji, B.O. (2010). A Unit for Reducing Vehicular Emissions in Petrol Engines. Proceedings of International Conference of the Nigerian Society of Engineers, Abuja, Nigeria. 6th -10th December, 2010, pp. 1-7.

21. Ismaila, S.O. and Charles- Owaba, O.E. (2009): A Model for Establishing  a Safe Weight of Lift. Proceedings of the 17th World Congress on Ergonomics of the International Ergonomics Association (IEA), S. Wang (Ed.) Paper ID: 2MU0007. Published by Chinese Ergonomics Society (CES).

22.  Ismaila, S.O. (2009): Statistical Procedure for Analyzing Road Accidents Data in Nigeria. Proceedings of 22nd Annual General Meeting &International Conference of the Nigerian Institution of Mechanical Engineers (NIMechE), L.O.Adekoya (Ed.) 182-184. Published by NIMechE

23. Ismaila, S.O. and Charles-Owaba, O.E. (2008): Load Limit for Lifting- Related Low Back Pain: A Mathematical Model. Proceedings of 2nd International Conference on Engineering Research and Development: Innovation (ICERD), Benin City, Nigeria 15-17 April, 2008, Ibahadode, A., Anyata, B.U. and Igbafe, I.A. (Eds) 1399-1405. Published by ICERD.

24. Ismaila, S.O. and Akanbi, O.G. (1998): Vehicle Replacement : A Dynamic Programming Approach. Proceedings of the 1998 Productivity Conference of Nigerian Institute of Industrial Engineers (NIIE), O.E. Charles-Owaba (Ed.) 210-217. Published by NIIE.

iii)     Book:
25. Ismaila, S.O. (2008). Guidelines to Registration as an Engineer. Ibadan: Published by Kay Concept.  ISBN 978-169-349-7 (Revised in 2011with ISBN 978-978-914-393-1 and Published by World Vision Network International)   

iv)     Poster Abstract:
1.    Charles-Owaba, O.E. and Ismaila, S.O. (2007) Weight Limit for Lifting-Related Low Back Pain Prevention: A Mathematical Model presented at Industrial Accident Prevention Association(IAPA) Conference held at Metro Toronto Convention Center, Canada, April 16-18, 2007 available on www.iapa.ca/main/resources/poster_abstracts.aspx

Articles Submitted For Publication
1.     A review of Manual Weight Lifting Limits
2.     Spinal Shrinkage as a Factor in Setting Manual Weight Limits
3.     Anthropometric data of hand, foot and ear of University Students in Nigeria
4.     Cost Minimization Approach to Manpower Planning
5.     A Study on Ergonomics Awareness in Nigeria
6.     Vehicle Emissions Characteristics of Vehicles on Nigerian Roads
7.     A Mathematical Model for Safe Weight of Lift.

Book Published
–    Ismaila S.O. (2008) Guidelines to Registration as an Engineer. Kay Concept, 5 Odukoya Street, Challenge, Ibadan  ISBN 978-169-349-7