Kuye, S. I: Publications

(a)    Thesis/Dissertation:
(i)    KUYE, S. I. (2007) – Effect of Variation of Preheat Temperature on the Corrosion Rate of Welded Mild Steel, M.Sc. Thesis Dept. of Metallurgy and Materials Engineering, University of Lagos, Nigeria.

(ii)    OWOKOYA, S. I. (1996) – Effect of Variation of Microstructures on the Performance of Mild Steel, M.Sc Thesis Dept of Mechanical Engineering, University of Lagos,Nigeria

(iii)    OWOKOYA, S. I.  (1992) – Design and Construction of Solar Air  Heater, B.Eng Thesis Dept.  of Mechanical Engineering, Federal University of Technology, Minna, Nigeria.

b.    Articles Published in Learned Journals
(i)    LAWAL, G. I., SEKUNOWO, O. I., KUFORIJI C. U. and KUYE, S. I. (2008). Influence of Welding Parameters on Corrosion Rate in Manihot Esculenta. Global Journal of Engineering and Technology, Vol. 1, No. 2, pp. 115 – 124.

(ii)    LAWAL, and KUYE, S. I. (2008). Effect of Pre-heat Treatment on Corrosion of Welded Mild Steel In Salty Environment. Global Journal of Engineering and Technology, Vol. 1, No. 4, pp. 395 – 404.

Publications 

1. M. A. Sulaiman, S. I. Kuye, S. A. Owolabi (2016). Investigation of Fouling Effect on Overall Performance of Shell and Tube Heat Exchanger in a Urea Fertilizer Production Company in Nigeria.Nigeria Journal of Technology, 35(1), pp 129-137.

  2.       S. I. Kuye (2013).  Analysis of the Dynamics of Offshore Fluid-Conveying Viscoelastic Pipes Resting on Deformable Sea Bed, Vol. 4, No. 5, pp 742-751.Journal of Emerging Trends in   Engineering and Applied Sciences, UK.

  3. O. R. Adetunji, S. I. Kuye, M. J. Alao (2013).  Microstructures of Mild Steel Spring after Heat Treatment, Vol. 14, No. 2, pp 11- 15. The Pacific Journal of Science and Technology, USA.  Published by Akamai University, Hawai, USA. Available on line at http://www.akamaiuniversity.us/PJST.htm.

  4. O. R. Adetunji, P. O. Aiyedun, S. B. Adejuyigbe, T. A. Arowolo, S. I. Kuye (2013). Modelling the Electrochemical Behaviour of Austenitic Stainless Steel in Some Selected Media, Vol. 3, No. 4 pp 23-27.  Journal of Electical and Control Engineering, American V-King Scientific Publishing, USA.

 5.          O. S. Olokode, P. O. Aiyedun, S. I. Kuye, B. U. Anyanwu, F. T. Owoeye, T. A. Adekoya and J. N. Nwonah (2013).  Optimization of the quantity of Wood Ash Addition on Kaolinitic Clay Performance in Porcelain Stoneware Tiles, Vol. 14, No.1,pp 48 – 56. The Pacific Journal of Science and Technology, USA.  Published by Akamai University,Hawai, USA. Available on line at http://www.akamaiuniversity.us/PJST.htm.

6.            F. T. Owoeye,O. S. Olokode, P. O. Aiyedun, S. I. Kuye, B. U. Anyanwu, H. O. Balogun and J. N. Nwonah (2013).  Evaluation of the Efficiency of Ceramic Membrane Pots in Treatment of Food Beverages, Vol. 14, No. 1, pp 89 – 97. The Pacific Journal of Science and Technology, USA. Published by Akamai University, Hawai, USA.  Available on line at  http://www.akamaiuniversity.us/PJST.htm.          

7.         S. O. Ismaila, V. O. Adogbeji, S. I. Kuye, I. A. Ola, T. O. A. Banmeke (2013).Energy Demand For Making Mounds Using Manual Hoe, pp. 121-124. International Journal of Engineering.Published by Annals of Faculty Engineering Hunedoara; Romania. Available on line at http://annals.fih.urpt.ro

8.          Ismaila, S. O., Akanbi, O. G., Adekunle, N. O., Adetunji,  O. R., Kuye, S. I. (2010): An Ergonomics Assessment of Locally Fabricated Passengers Seats in Buses in South Western Nigeria.  Sigurnost (Safety), Vol. 52, No. 4, pp.329-334. Published by Institute of Safety Research and Development,Croatia.   

 9. Kuye, S. I. and Faleti, S. I. (2010):  Influence of Electrode Diameter on the Corrosion Behaviour of Welded Mild Steel.ASSET, Series B Vol. 9, No. 1. Published by Federal University of Agriculture, Abeokuta. Available on line at  http://www.unaab.edu.ng/journal.

 10. Kuye, S. I. and Faleti, S. I. (2009).  Effect of Variation of Electrode Diameter on the Corrosion Rate of Welded Mild Steel in Cassava Juice. International Journal of Biological and Physical Sciences, Vol. 14, No. 3, pp. 248 – 353. Published by Ladoke Akintola University, Ogbomoso.Available online at www.sciencefocusngr.org.

 

c.    Paper  already Accepted for Publication
(iii)    KUYE, S. I. and Faleti, S. I.(2009).  Effect of Variation of Electrode Diameter on the Corrosion Behaviour of Welded Mild Steel.  Science Focus; An International Journal of Biological and Physical Sciences.

d.      Papers in Refereed Conference Proceedings:
(iv)    KUYE S. I., ADEKUNLE, N. O. and ADETUNJI, O. R. (2008). Estimation of  Average Daily Solar Intensity for Abeokuta. Proceedings of the 3rd International Conference on Science and National Development, University of Agriculture, Abeokuta, Nigeria. November, 2008.

(v)    KUYE S. I., ADEKUNLE, N. O., ADETUNJI, O. R. and OLALEYE D. O. (2008). Design and Construction of Solar Incubator. Proceedings of the 3rd International Conference on Science and National Development, University of Agriculture, Abeokuta, Nigeria. November, 2008.

(vi)    OLUNLOYO, V. O. S., OSHEKU, C. A. and KUYE S. I. (2009).  On the Dynamics and Stability of a Viscoelastic Pipe Conveying a Non-Newtonian Fluid.  Proceedings of OMAE 2009, ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, Hawaii.  May 2009. OMAE 2009 – 79588.

e.    Paper Submitted for Publication
KUYE, S. I. and Faleti, S. I. (2009).  Influence of Electrode Diameter on the Corrosion Rate of Welded Mild Steel in Cassava Juice, ASSET.