Engr.

ADERINLEWO Adewole Ayobami 

LinkedIn

Short Profile

Dr. Adewole Ayobami, ADERINLEWO obtained his Bachelor of Science degree (BSc.) in Agricultural Engineering from Obafemi Awolowo University Ile-Ife, Nigeria in 1997, and Master of Science degree (MSc.) from University of Ibadan in 2000. He is currently working on his Doctor of Philosophy (PhD.) at the University of Ibadan. Aderinlewo a lecturer I specializes in Farm Power and Machinery.

He is involved in teaching and supervision of both graduate and undergraduate students he is also a Member Nigerian Society of Engineer and Council for the Regulation of Engineering in Nigeria.

Ph.D 2011
M. Sc 2000
B.Sc 1997

(i) Research completed
a. Design and construction of a mechanical vibrator for yam tuber.
b. Development of a draper separator for palm kernel and shell
c. Development of a mobile melon depoding machine
d. Development of a manual vegetable seed broadcaster.
(ii) Research in progress
a. Development of an incline plane separator for palm kernel nut and shell
b. Development of a single row cassava stem planter
c. Development of a cassava tuber peeling machine
d. Optimization and fabrication of a portable floating drum biogas reactor

a) Acting Head of Department of Agricultural and Bio-resources Engineering, August 2019 to July 2021
b) Acting Programme Leader, Agricultural Mechanisation and Energy Research Programme, IFSERAR. August 2018 to July 2020
c) COBFAS coordinator for COLENG, 2017 – 2020
d) Member College Committee on Examination Results (COCER) 2010 till date
e) Postgraduate Coordinator, November 2013 to August 2019
f) Chairman, Ad-Hoc committee on complaints on the production and installation of burglar proofs for the ground floor windows of college of management Sciences (COLMAS) building. August 2017
g) Examination Officer, Department of Agricultural Engineering 2006 to 2013
h) Seminar Coordinator, Department of Agricultural Engineering 2006 to 2013
i) Assistant Postgraduate Coordinator, May 2013 to November, 2013

*     Member Nigerian Society of Engineers
*    Council for the Regulation of Engineering in Nigeria

i. 3RD College of Engineering International Conference on Engineering Innovations as a Catalyst for Rapid Economic Growth. May 24 – 26, 2021
ii. PASAE-NIAE 2021 Virtual International Conference. Pan African Society of Agricultural Engineers. April 19 – 22, 2021
iii. College of Engineering International Conference, Federal University of Agriculture, Abeokuta , May 14th -17th, 2018. Paper read: Design and construction of a motorized juice extractor.
iv. College of Engineering International Conference, Federal University of Agriculture, Abeokuta , March 7th -11th, 2016. Paper read: Performance evaluation of a two row cowpea planter
v. Faculty of Technology International Conference. Obafemi Awolowo University, September 20th – 25th, 2015. Paper read. Performance evaluation of a rotary screen cowpea cleaner.
vi. 6th International Conference of the Nigerian Institution of Agricultural Engineers, Obafemi Awolowo University, Ile Ife. 11 – 15th September, 2009
vii. 3rd International Conference on Science and National Development, Federal University of Agriculture, Abeokuta. 24 – 27th November, 2008. Paper read: Moisture Dependence of some Aerodynamic Properties of Beniseed.

1. *Aderinlewo A. Adewole, Obukomena O. Akivie, Olayemi J. Adeosun and Peter O. Omotainse (2021). Effect of pretreating poultry wastes with cocoa pod husk ash and cassava peel ash on biogas production. FUOYE Journal of Engineering and Technology 6(1): 7-9. Published by Faculty of Engineering, Federal University of Oye-Ekiti. http://journal.engineering.fuoye.edu.ng
2. *FAdisa A. F., Mamah, K. C., Aderinlewo A. A., Ismaila S. O.,(2020). Effectiveness of rubber as roller material for rice processing machine. Journal of Agriculture and Natural Resources 54: 98-104. Published by Elsevier Publishers (Scopus).
3. *Aderinlewo A. A. and Afose M. D. (2020). Performance evaluation of a hand pushed vegetable seed broadcaster. Journal of Engineering Research 25(2): 192 -196. Published by University of Lagos. http://journals.unilag.edu.ng
4. Aderinlewo A. A., Ayokambi S. A.,Dairo O. U. and O. J. Adeosun (2019) Evaluation of the Performance of a rotary screen cowpea cleaner – A Response Surface Approach. Journal of Engineering and Technology 4(1):13-18. Published by Federal University of Oye Ekiti. http://journal.engineering.fuoye.edu.ng
5. *Dairo O. U.,Oyenusi A., Aderinlewo A. A., Adetunji O. R.,and Adeleke E. A. (2018). Modelling the air-flow resistance of bulk sponge gourd (Luffa Cylindriacal). LAUTECH Journal of Engineering and Technology 12(2): 1-9. Published by Faculty of Technology, Ladoke Akintola University of Technology, Ogbomoso. https://www.lautech.com
6. Aderinlewo A. A. Biobaku O. L. and V. O. Adepoju (2018). Design and construction of a motorized juice extractor. Journal of Science and Technology 4:64-67. Published by Federal University Lafia. https://journals.fulafia.edu.ng
7. Adeosun O. J.,Olanrewaju O. O., Dairo O. U., Aderinlewo A. A. and Ogunwande G. A. (2018). Evaluation of earthworm as biofiltration agent in organically polluted water. Journal of Science and Technology 4: 58-63. Published by Federal University Lafia. https://journals.fulafia.edu.ng
8. Aderinlewo A. A. Dairo O.U. and Saludeen O. (2018). Drying kinetics of plantain slices using a mixed solar dryer. Umudike Journal of Engineering and Technology 4(2):104-112. Published by University of Agriculture, Umudike. https://ujetmouau.net
9. F Aderinlewo A. A., Agboola A. A., Adeosun O. J., Ajisegiri E. S. A. and A. F. Adisa (2018). Investigation of separation of palm kernel and shell on an inclined plain separator. ACTA Technica corviniensis-Bulleting of Engineering.11(2): 135 – 137. Published by University POLITEHNICA Timisoara, Romania. http://annals.fih.upt.ro (Google scholar/Ebscohost).
10. FAderinlewo A. A., and Layode O. F. (2018). The effect of plantain peel ash on biogas production from cow dung. Journal of Sustainability, Agriculture, Food and Environment, 6(1): 11-17. Published by Catholic University, Chile https://www.neliti.com (Index Copernicus International).
11. FAderinlewo A. A., Agboola A. A., Adeosun O. J., Ajisegiri E. S. A. and A. F. Adisa (2018). Some physical and mechanical properties of shell and kernel of Nigerian dura and tenera oil palm varieties. International Journal of Engineering, 16(1): 116 -1119. Published by University POLITEHNICA Timisoara, Romania. http://annals.fih.upt.ro (Google scholar/Ebscohost)
12. FAlex Folami Adisa, Nseobong Obioha Eberendu, Adewole Ayobami Aderinlewo and Ibiyemi Sidikat Kuye (2016). Performance evaluation of a developed rice processing machine. Journal of Agricultural Engineering, 47: 174-179. Published by Italian Society of Agricultural Engineering. https:agroengineering.org (Scimago)
13. FAlex Folami Adisa, Nseobong Obioha Eberendu, Adewole Ayobami Aderinlewo and Ibiyemi Sidikat Kuye (2016). Effectiveness of Teflon as roller material for a prototype rice processing machine, Agricultural Engineering International, 18(4): 107 – 118. Published by International Commission of Agricultural Engineering (CIGR). https.cigrjournal.org (Scopus)
14. Aderinlewo A.A, Ayokambi S. A., Adetunji L.R. and Olakunle E. O. (2016). Influence of screen speed and air velocity on the cleaning efficiency of a rotary screen cowpea cleaner. Journal of Experimnetal Research, 4(1); 38-42. Published by Enugu State University of Science and Technology, Enugu, Nigeria. https://www.er-journal.com
15. Adeosun O.J., Olorunnisola A.O., Lucas E. B., Dairo O.U. Aderinlewo A.A., and Ola I. A. (2015). Optimization of char in the pyrolysis of palm kernel shell using response surface methodology. Lautech Journal of Technology, 9(2): 11 -16. Published by Faculty of Technology, Ladoke Akintola University of Technology, Ogbomoso. https://www.lautech.com
16. Ola I. A., Aremu O. O., Aderinlewo A. A., Aiyedun P.O., Ajayi A. O., and Ajisegiri E. S. A. (2015). Simulation of the cassava stem cuttings on an inclined wood surface. Journal of Natural Science, Engineering and Technology, 14(2):85-97 Published by Federal University of Agriculture, Abeokuta, Nigeria. https://journal.unaab.edu.ng
17. Adeosun O. J., Shobayo O. O., Dairo O. U., Aderinlewo A. A. and I. A. Ola (2015). Assessment of waste management practices on farms in Abeokuta environs, Ogun State, Nigeria. Journal of Natural Science, Engineering and Technology, 14(2):98-105. Published by Federal University of Agriculture, Abeokuta. https://journal.unaab.edu.ng
18. FAdisa A. F., Vaughan I. O., Aderinlewo A. A., and Dada P. O. (2015) .Technical and social – economic relivance in technical adoption: case study on rotary tiller equipment in Nigeria. Agricultural Mechanisation in Asia. Africa and Latin America. 46(4): 57 – 62. Published by Farm Machinery Industrial Research Corp., Japan. (Scopus)
19. FDairo O. U., Aderinlewo A.A., Adeosun O. J., Ola I.A. and Salaudeen O. (2015).solar drying kinectics of cassava slicesin a mixed flow dryer. Acta Technologica Agriculturae: The Scientific Journal of Agricultural Engineering, 18(4):102-107. Published by Slovakia University of Agriculture in Nitra. https:sciendo.com ( Scopus)
20. FAderinlewo A. A. and A. O. Raji (2015). Effects of angle of injection and air velocity on displacement of cowpea and impurities in a vertical pneumatic cleaner. International Journal of Engineering, 13(4): 1584-2673. Published by University POLITEHNICA Timisoara, Romania. http://annals.fih.upt.ro (Google scholar/Ebscohost)
21. Adeosun O.J., Shobayo, O. D., Dairo, O. U., Aderinlewo A. A., and Ola I.A. (2015). Assessment of Waste Management Practices on Farms in and around Abeokuta, Ogun State, Nigeria. International Journal of Agricultural Science, Environment and Technology: 14(2):98-105. Published by Federal University of Agriculture, Abeokuta.
22. Aderinlewo A.A. Dairo O.U. (2014), Adeosun O. J., Ola O. A. and Saludeen O. Suitable thin layer drying model of cassava slices using a mixed mode solar dryer. Lautech Journal of Technology, 8(1):35 – 41. Published by Faculty of Technology, Ladoke Akintola University of Technology, Ogbomoso, Nigeria. https://www.lautech.com
23. FAderinlewo A. A. and Raji A. O. (2014). Modelling and simulation of separation of cowpea in a vertical flow pneumatic cleaner. Journal of Engineering Studies and Research 20(3): 7 – 12. Published by University of Bacua, Romania Availabe at www.pubs.ub.ro (Index Copernicus)
24. Adisa A. F., Vaughan I. O., Aderinlewo A. A., and Dada P. O. (2013). An appraisal of tillage equipment for smallholder farming adoption. Journal of Applied Agricultural Research 5(2): 117 – 124. Published by Agricultural Research Council of Nigeria
25. Aderinlewo A.A. and A.O. Raji (2013). Analysis of pneumatic cleaning of cowpea. Journal of Applied Agricultural Research. 5(2): 111 – 116. Published by Agricultural Research council of Nigeria.
26. Aderinlewo A.A. and Adetunji L. R. (2013). Development and preliminary testing of a rotary screen cowpea cleaner. Journal of science, Technology, Mathematics and Education. 9(2): 116-124. Published by Federal University of Technology, Minna, Nigeria. https://jostmed.futminna.edu.ng
27. Aderinlewo A. A. ,A.F. Adisa and O. Salaudeen (2013). Investigation of solar drying of plantain and cassava slices under natural convection. Journal of Experimental Research, 1(1):23-26. Published by Enugu State University of Science and Technology, Enugu, Nigeria. https://www.er-journal.com
28. Aderinlewo A.A., A.O. Raji and T.M.A. Olayanju (2011). Effect of moisture content on some physical properties of cowpea (Vigna unguiculata). Journal of Natural Sciences, Engineering and Technology. 10(2): 133-145. Published by Federal University of Agriculture, Abeokuta, Nigeria. https://journal.unaab.edu.ng
29. Aderinlewo A. A. , Raji O. A. and T. M. A. Olayanju (2011). Effect of variety and moisture content on aerodynamic properties of four Nigerian cowpea varieties. ASSET International Journal, 10(1): 106-115. Published by Federal University of Agriculture, Abeokuta, Nigeria. https://journal.unaab.edu.ng
30. Olayanju T. M. A., Akinoso A. A., Aderinlewo A. A., Dairo O.U. and Ola I. A. (2009). Moisture Dependence of some Aerodynamic Properties of Beniseed. ASSET International Journal, 8(1):62 – 70. Published by Federal University of Agriculture, Abeokuta, Nigeria. https://journal.unaab.edu.ng
31. Bamigboye A.I. and Aderinlewo A.A. (2002) Agricultural equipment availability in Oyo State. Moor Journal of Agricultural Research. 3(1): 126-129.. Published by Institute of Agricultural Research and Training (Obafemi Awolowo University), Ibadan., Nigeria

(ii) Conference Proceedings

32. FADEOSUN Olayemi Johnson, Olawale Usman DAIRO, Adewole Ayobami ADERINLEWO, Gbolabo Abidemi OGUNWANDE, Jadesola Mayowa OGUNYINKA and Babajide Adebowale ADEOSUN (2019). Vermicomposting of paper waste and cassava peels residue: Effect of duration and Feedstock loading rate. Proceedings Farm Machinery and Process Management in Sustainable Agriculture, X International Scientific Symposium, Lublin, Poland. Edited by Edmund Lorencowicz, Jacek Uziak, Bruno Hyghewbaert
33. Aderinlewo A. A., Olaoluwa A. L. and O.U. Dairo (2016). Performance evaluation of a two row cowpea planter. Proceedings FUNAAB College of Engineering International Conference, 2016. J. K. Adewumi, A. A. Adekunle, T. M. A. Olayanju, S. O. Ismaila and O. U. Dairo (Eds.) pp 310 – 313
34. Mamah K. C., Adisa A. F., Aderinlewo A. A. and S. O. Ismaila(2016). Experimental research on performance evaluation of a roller rice dehusking and destining machine, Proceedings FUNAAB College of Engineering International Conference, 2016 2016 J. K. Adewumi, A. A. Adekunle, T. M. A. Olayanju, S. O. Ismaila and O. U. Dairo (Eds.) pp 54 – 63
35. Osanyinpeju K. L., Aderinlewo A. A., Adetunji O. R. and E. S. Ajisegirir (2016). Development of a solar powered poultry egg incubator. Proceedings FUNAAB College of Engineering Internationla Conference, 2016 J. K. Adewumi, A. A. Adekunle, T. M. A. Olayanju, S. O. Ismaila and O. U. Dairo (Eds.) pp 278 – 288
36. Oladele J. O., Dairo O. U., Aderinlewo A. A. and O. P. Sobukola (2016). Determination of suitable thin layer drying curve model for sponge-gourd seed (Luffa Cylindrical). Proceedings FUNAAB College of Engineering International Conference, 2016 .J. K. Adewumi, A. A. Adekunle, T. M. A. Olayanju, S. O. Ismaila and O. U. Dairo (Eds.) pp 177 -183
37. Aderinlewo A. A., Ayokambi S. A.,Dairo O. U. and O. J. Adeosun (2015) Performance evaluation of a rotary screen cowpea cleaner. Proceedings OAU Faculty of Technology International Conference 2015 E. Betiku, B. S. Ogunsina and A. M. Jubril (Eds.) pp 1-3

Last Updated:

CONTACT US
Postal Address: P.M.B 2240, Abeokuta, Ogun State, Alabata Road, Abeokuta, Ogun State.
Tel: (+234) 805-5249-564     Email: adekolaha@funaab.edu.ng | examsandrecords@funaab.edu.ng